- Purple
- WiFi analytics: a complete guide
- Car dealership WiFi platforms checklist: customer lounges, workshop devices and showroom visit reports
Car dealership WiFi platforms checklist: customer lounges, workshop devices and showroom visit reports
Use this checklist to choose and deploy a car dealership WiFi platform across your group. You will be able to separate guest, staff and workshop traffic, and build a CCPA/CPRA-compliant service lounge sign-in. You can also compare visits and dwell time by site, and test every vendor live against eight requirements during demos.
By Tom HackettPublished
📖 13 min read3,031 words2 worked examples11 key definitions
Part of our core series: WiFi analytics and location intelligence: the complete guide →
- What does a car dealership WiFi platform actually do?
- What does a dealer group need before choosing a platform?
- Hardware and connectivity
- Devices and identity
- Data and ownership
- How do you set up dealership guest WiFi, staff and workshop networks?
- Which networks does a dealership need across showroom, lounge and workshop?
- What should the service lounge sign-in ask for?
- How do you keep diagnostic tools and workshop devices off the guest network?
- Which visit reports help a dealership group compare sites?
- How can lounge sign-ins support service reminders and sales follow-up with consent?
- Two worked examples from dealer groups
- A 12-site franchised dealer group replacing shared passwords
- A showroom running a model launch evening
- How do you check the dealership network works?
- What goes wrong, and how do you fix it?
- What does a dealer group WiFi platform cost, and what do you get back?
- Dealer group WiFi platform checklist
- Frequently asked questions
- Does Purple work with the access points already installed in our dealerships?
- Is the service lounge sign-in compliant with CCPA/CPRA?
- Can lounge sign-ins feed our CRM?
- Do diagnostic tools need their own network?
- How does a platform compare with the free WiFi from our broadband provider?
- How long does rollout across a dealer group take?
- Will segmentation help with PCI DSS for our card terminals?

A auto dealership WiFi platform should run three networks. A branded guest sign-in serves the showroom and service lounge. Staff authenticate through IEEE 802.1X. Diagnostic tools and service center handhelds sit on their own isolated network. The platform should report visits and dwell time by location. It should also hold CCPA/CPRA-compliant consent that service and sales teams can use.
What does a car dealership WiFi platform actually do?
A dealership puts three different groups on one site's WiFi:
- Visitors wait in the service lounge or browse the showroom.
- Sales executives and service advisors need the dealer management system (DMS).
- Diagnostic tablets and service center handhelds need a dependable connection to manufacturer servers.
A broadband router with one shared password treats all three the same. Every device can see every other device. The password ends up on a card at reception, and you learn nothing about who visited.
A car dealership WiFi platform does four jobs instead:
- Separates traffic. Guest, staff, and service center devices each get their own network and VLAN. A VLAN (virtual LAN) is a logical segment that keeps traffic apart on shared cabling.
- Signs visitors in. A branded captive portal is the web page a visitor sees before getting online. It asks for a few details and records consent.
- Reports visits by location. Visits, dwell time, and new versus returning visitors appear per dealership, so you can compare locations in one view.
- Holds a consented list. Service and sales teams follow up only with visitors who chose to hear from you.
Purple delivers this as a cloud overlay on the access points you already own. Purple runs at 80,000+ live venues in over 90 countries and reaches 500 million users and logins a year. Dealer groups sit within automotive retail, so the Retail and Guest WiFi pages cover the wider platform.
What does a dealer group need before choosing a platform?
Most rollout delays come from missing information, not missing technology. Gather these before the first demo.
Hardware and connectivity
- Access point inventory per location. Record vendor, model, firmware, and how each location is managed, by cloud dashboard or on-site controller. Purple supports Cisco Meraki, HPE Aruba, Ruckus, Juniper Mist, Ubiquiti UniFi, Cambium, Extreme, and Fortinet.
- Internet bandwidth per location. Lounge video streaming and service center software downloads share the same line.
- A location naming convention. Use one pattern for every dealership, such as brand, city, and location type. Reports are only as clean as the names behind them.
Devices and identity
- A workshop device list. Include diagnostic tablets, vehicle communication interfaces (VCIs, the units that plug into a car's diagnostic port), parts scanners and alignment kit. Note which devices support IEEE 802.1X, the standard for authenticating each person or device before it joins.
- Your identity provider. Microsoft Entra ID, Okta or Google Workspace, so staff sign in with the account they already use.
Data and ownership
- Consent wording signed off by your data protection officer. Sales follow-up and service reminders need separate, specific consent under CCPA/CPRA.
- A destination for the data. Decide whether sign-ins flow to your CRM or a marketing platform, and who owns that connection.
- Named owners. The IT manager owns the networks. The service director owns the lounge experience. The group marketing manager owns consent and follow-up.
How do you set up dealership guest WiFi, staff and workshop networks?
Every site follows the same order: networks, then sign-in, then devices, then reporting and data. Purple's support documentation holds the configuration steps for each hardware vendor. This section covers the decisions behind those steps.
Which networks does a dealership need across showroom, lounge and workshop?
Three wireless networks cover most dealerships. Card terminals belong on a wired or dedicated segment of their own.
| Network | Who connects | How they authenticate | Isolation | What you get |
|---|---|---|---|---|
| Guest (showroom and service lounge) | Service visitors, showroom visitors, test-drive prospects | Branded captive portal sign-in | Own VLAN, client isolation, internet only | Visits, dwell time and consented contacts per site |
| Staff | Sales executives, service advisors, managers | IEEE 802.1X (WPA2- or WPA3-Enterprise) via Microsoft Entra ID, Okta or Google Workspace | Staff VLAN with access to the DMS and internal systems | Access ends when the account is disabled |
| Workshop devices | Diagnostic tablets, VCIs, handheld scanners, alignment kit | iPSK, one key per device or device group | Workshop VLAN with no route to guest devices | Revoke one device without re-keying the site |
| Payments | Card terminals and back-office registers | Wired or dedicated network | Segmented cardholder data environment | Smaller PCI DSS assessment scope |
Run one guest network across both showroom and lounge. Fewer network names mean fewer questions at reception. Reporting can still split zones where your access point layout allows it.
What should the service lounge sign-in ask for?
Ask for only what you need to follow up. A visitor waiting on a service will usually give an email address. Few will complete a 10-field form.
A sound lounge sign-in asks for:
- Name and email address. These are enough to send a service follow-up, or a sales message where consent allows.
- Vehicle registration, optional. It lets aftersales match a sign-in to a service record. Keep it optional so it never blocks access.
- Two separate, unticked consent boxes. One covers service and state inspection reminders, the other covers sales offers. Purple calls these conscious-choice opt-ins.
- A link to your privacy notice. Name the dealership group and explain what each consent covers.
Brand the page with the franchise and group identity. Show a useful next step, such as a service update or current offers.
CCPA/CPRA requires consent to be freely given, specific, informed and unambiguous. Pre-ticked boxes do not count. US electronic marketing also falls under the TCPA and CAN-SPAM. Making WiFi access conditional on marketing consent fails both tests.
How do you keep diagnostic tools and workshop devices off the guest network?
Put every workshop device on its own VLAN with its own credentials. Then block any route between that VLAN and the guest network.
Many diagnostic tablets and VCIs cannot run IEEE 802.1X. iPSK (identity pre-shared key, also sold as PPSK) handles this. Each device or device group gets its own key on the same network name. When a tablet goes missing, you revoke one key and every other device stays online.
Staff laptops and cell phones should use 802.1X instead. It checks credentials against a RADIUS server, the service that approves or rejects each login. Purple provides cloud RADIUS, and its Identity-Based Networks tie access to the Microsoft Entra ID, Okta or Google Workspace account. Joiners get access on day one. Leavers lose it the moment IT disables the account.
If your staff networks still run PEAP-MSCHAPv2, read PEAP-MSCHAPv2: Why It Is Still Common, Why It Is Risky, and How to Move On before you migrate.
Three rules keep the workshop dependable:
- Prioritize workshop traffic. Manufacturer software updates can be large. Cap guest bandwidth per device so lounge streaming does not slow a diagnostic session.
- Restrict outbound access where you can. Allow the manufacturer and update services the tools need, and block everything else.
- Keep card terminals separate. PCI DSS treats network segmentation as the way to reduce the scope of an assessment.
Securing a business network: A practical guide for 2026 covers segmentation in more depth.
Which visit reports help a dealership group compare sites?
A report earns its place when it changes a decision. For a dealership group, five views do most of the work:
- Visits per site per day. Compare like-for-like sites and find the dealership short of visits rather than conversions.
- Dwell time by site. Long lounge dwell points to workshop capacity. Short showroom dwell can point to staffing or inventory display.
- New versus returning visitors. Returning lounge visitors are your aftersales base. New showroom visitors are sales pipeline.
- Visits by hour and weekday. Staff service reception and the sales floor to match real demand.
- Sign-ins against visits. A low ratio at one site usually means the form is too long or the signage is missing.
WiFi Analytics shows these views across every site in one dashboard. Group marketing sees the whole estate, and each general manager sees their own dealership.
How can lounge sign-ins support service reminders and sales follow-up with consent?
The service lounge is where the group meets its most loyal visitors. A sign-in there turns an anonymous wait into a consented, contactable record.
Route the two consents to two different owners. Service reminder consent goes to aftersales, matched to the vehicle registration where the visitor gave it. Sales consent goes to the sales team, flagged with the site and visit date.
Purple integrates with CRM and marketing platforms, so new sign-ins reach your systems without manual exports. 8 smart integration ideas to connect guest WiFi and CRM sets out common patterns. Purple's Engage plan is built for working this consented list.
Honor every withdrawal. When a visitor unsubscribes, that change must reach every system that holds their record.
Got questions about your specific setup?
Our team works with venue operators, IT managers, and network engineers across 80,000 venues. Book a 20-minute call and we will show you how others like you solved it.
Two worked examples from dealer groups
These are illustrative scenarios, not named deployments. Each shows the situation, what was done and the measurable outcome.
A 12-site franchised dealer group replacing shared passwords
Situation. Each dealership ran one WiFi password for everyone. Diagnostic tablets, staff laptops and lounge visitors shared one network. Group marketing had no view of lounge or showroom visits.
What was done. The group kept its Cisco Meraki access points and added Purple as a cloud overlay. Each site moved to three networks. Staff authenticated by 802.1X against Microsoft Entra ID, and workshop devices received iPSK keys by device group. The lounge sign-in asked for name, email, optional registration and two unchecked consent boxes.
Outcome. 12 shared site passwords became one guest sign-in, individual staff identities and a separate key per workshop device group. Group marketing compared all 12 sites in one report, where before it had none. Removing a leaver became a single action in Entra ID.
A showroom running a model launch evening
Situation. A single-franchise showroom invited prospects to a launch event. Previous launches produced a pile of business cards and no consent records.
What was done. The showroom ran an event-branded sign-in on the guest network for the evening. It carried one consent box for test-drive follow-up. Sales staff stayed on the staff network, unaffected by attendee traffic.
Outcome. Every attendee contact arrived with a timestamped consent record and the visit date. The sales team worked the list the next morning instead of re-keying cards. Visits by hour showed when the floor peaked, which set staffing for the next launch.
The same three-network pattern runs in Hotels, where guests, staff and back-of-house devices share one building.
How do you check the dealership network works?
Test each site before you announce it. Run these checks from a cell phone and a laptop on every network.
- Isolation. From a guest device, try to reach a workshop tablet and the DMS. Both attempts should fail.
- Client isolation. Two guest devices should not see each other.
- Sign-in on both platforms. Join from an iPhone and an Android phone. The captive portal should open automatically and finish in under a minute.
- Consent record. Sign in with a test address, check one box and leave one clear. The record should show exactly that, with a timestamp.
- Data flow. Confirm the test sign-in reaches your CRM with the correct site name.
- Leaver test. Disable a test account in your identity provider. The device should lose staff network access.
- Workshop revocation. Revoke one iPSK key. That device drops, and every other device stays connected.
- Reporting. Check the site appears in WiFi Analytics with its correct name and opening hours.
What goes wrong, and how do you fix it?
Most faults at dealerships fall into seven patterns.
| Symptom | Likely cause | Fix |
|---|---|---|
| The sign-in page does not appear | Walled garden or DNS settings block captive portal detection | Apply the walled garden entries in Purple's support documentation for your access point vendor |
| A diagnostic tablet will not join | The device does not support 802.1X | Move it to the workshop network with its own iPSK key |
| Diagnostic sessions drop at busy times | Lounge streaming saturates the line | Cap per-device guest bandwidth and prioritize the workshop VLAN |
| Visit counts fall after a phone update | Randomized MAC addresses make returning devices look new | Use sign-in data for returning visitors and compare weekly trends |
| Opt-ins jump at one site | A consent box is pre-checked or tied to access | Restore separate, unchecked boxes and review consent captured since the change |
| Sign-ins never reach the CRM | Fields or sites are mapped incorrectly | Re-map the fields and run a fresh test sign-in |
| Site reports look wrong | Inconsistent site names or opening hours | Apply the naming convention and correct each site's hours |
The MAC address issue catches most groups. A MAC address is the hardware identifier a device presents to the network. Recent iOS and Android versions use a private, randomized address per network by default. Treat sign-ins as your source of truth for returning visitors, and read visit counts as trends.
What does a dealer group WiFi platform cost, and what do you get back?
Three things drive the cost: the plan, the number of locations and whether you need new hardware. Hardware is usually the largest line item, and often one you can skip. Purple is hardware-agnostic and layers on top of existing infrastructure, with no rip-and-replace required. Why your next WiFi upgrade doesn't need new hardware explains the overlay model.
Purple's plans step up from Connect to Capture to Engage. A group that wants consented follow-up from the lounge needs Engage.
What you get back:
- A consented contact list from every service lounge, with a consent record behind each entry under CCPA/CPRA.
- One view of every location, so group marketing compares dealerships on visits, dwell time and sign-in rate.
- Fewer shared secrets. Staff access ends with the Entra ID, Okta or Google Workspace account, and shop keys are revoked one at a time.
- Smaller PCI DSS scope, because card terminals sit on a segmented network.
- Assurance for procurement. Purple holds ISO 27001 and Cyber Essentials certification and is CCPA/CPRA compliant.
Build your business case from your own baseline. In the first month, record visits, sign-in rate and consented contacts per location. Then measure service bookings from consented lounge visitors quarter over quarter.
Dealer group WiFi platform checklist
Use this table in vendor demos. Each row has a test you can ask to see live.
| Requirement | What good looks like | Ask the vendor |
|---|---|---|
| Hardware support | Runs on Cisco Meraki, HPE Aruba, Ruckus, Juniper Mist, Ubiquiti UniFi, Cambium, Extreme or Fortinet | Which of our access point models do you support today? |
| Network separation | Guest, staff and shop on separate VLANs | Show a guest device failing to reach a shop device |
| Shop devices | iPSK with revocation per device | How do we revoke one tablet without re-keying the location? |
| Staff access | IEEE 802.1X via Microsoft Entra ID, Okta or Google Workspace | What happens to WiFi access when HR disables an account? |
| Lounge sign-in | Branded, four fields at most, two unchecked consent boxes | Show the consent record for one test sign-in |
| Visit reports | Visits, dwell time, new versus returning, by location and hour | Show every location side by side in one view |
| Data flow | Sign-ins reach the CRM without manual export | Which CRM and marketing platforms do you integrate with? |
| Compliance | ISO 27001, SOC 2 Type II, CCPA/CPRA | Can we see your ISO 27001 certificate? |
Frequently asked questions
Does Purple work with the access points already installed in our dealerships?
Yes, Purple runs as a cloud overlay on access points from Cisco Meraki, HPE Aruba, Ruckus, Juniper Mist, Ubiquiti UniFi, Cambium, Extreme and Fortinet. You keep the hardware you own and point it at Purple for sign-in, authentication and reporting. Check each site's model and firmware against Purple's support documentation during planning, because older equipment at smaller sites is the usual exception.
Is the service lounge sign-in compliant with CCPA/CPRA?
Yes, when you configure it correctly. Purple is ISO 27001 certified and GDPR compliant, and the sign-in uses conscious-choice opt-ins: separate, unchecked boxes for each purpose. Your data protection officer should approve the consent wording and privacy notice. Never make WiFi access conditional on marketing consent, because CCPA/CPRA requires freely given consent and the TCPA and CAN-SPAM governs electronic marketing in the US.
Can lounge sign-ins feed our CRM?
Yes, Purple integrates with CRM and marketing platforms, so consented sign-ins reach your systems without manual exports. Map the fields once: name, email, optional vehicle registration, site, visit date and each consent flag. Route service consent to aftersales and sales consent to the sales team. Test with one sign-in per site before go-live.
Do diagnostic tools need their own network?
Yes. Workshop devices should sit on their own VLAN, away from guest traffic. A shared network exposes diagnostic tablets to every visitor device and lets lounge streaming compete with manufacturer software downloads. Many tools cannot use IEEE 802.1X, so iPSK gives each device or device group its own key. You can then revoke one lost tablet without changing the key for the whole workshop.
How does a platform compare with the free WiFi from our broadband provider?
A broadband router gives you one shared password and no data, while a platform gives you separated networks, a branded sign-in and site reports. With a router, visitors, staff and workshop devices often share one network. You hold no consent records and cannot compare sites. A car dealership WiFi platform adds VLAN separation, 802.1X for staff, iPSK for devices and visit reports across the group.
How long does rollout across a dealer group take?
Rollout is mainly configuration, not installation, where your access points are already supported. The work per site covers network setup, the sign-in page, workshop keys and a test pass. Most elapsed time sits in preparation: the device inventory, consent wording and CRM mapping. Pilot one dealership, fix the template, then apply the same configuration to every other site in the group.
Will segmentation help with PCI DSS for our card terminals?
Yes, segmentation helps. PCI-DSS treats network segmentation as a way to reduce the scope of an assessment. Keep card terminals on a wired or dedicated segment, separate from the guest, staff, and workshop networks. Purple runs the guest, staff, and workshop networks. Your payment provider and qualified security assessor confirm the final scope of the cardholder data environment.
Key Definitions
IEEE 802.1X
The IEEE standard for port-based network access control. It defines how a supplicant (the device), an authenticator (the access point) and an authentication server exchange EAP messages, so each person or device is authenticated before it joins the network. It underpins WPA2-Enterprise and WPA3-Enterprise.
You meet it when setting up the staff network for sales executives and service advisors. It ties WiFi access to each individual account, so access ends when IT disables that account.
RADIUS
Remote Authentication Dial-In User Service, specified in IETF RFC 2865. It is the protocol an access point uses to send login requests to a central server, which approves or rejects each one and can return policy such as a VLAN assignment.
The RADIUS server is what checks staff credentials on the 802.1X network. Purple provides cloud RADIUS, so you do not need to run an on-site server at each dealership.
VLAN
A virtual LAN, defined by IEEE 802.1Q, which tags frames so that separate logical networks share the same physical cabling and switches while their traffic stays apart.
Guest, staff and workshop devices each sit on their own VLAN. Ask every vendor to show a guest device failing to reach a workshop device across these segments.
iPSK (identity pre-shared key)
A vendor implementation, also sold as PPSK, that issues a unique WPA2-Personal style passphrase to each device or device group on the same network name. The authentication server maps each key to an identity and policy, so one key can be revoked without affecting others.
Many diagnostic tablets and VCIs cannot run 802.1X. iPSK gives each one its own key, so a missing tablet is revoked in one action and the rest of the workshop stays online.
WPA3-Enterprise
The enterprise mode of the WPA3 security certification, which uses IEEE 802.1X with EAP for per-user authentication and requires Protected Management Frames. It succeeds WPA2-Enterprise.
The staff network runs WPA2- or WPA3-Enterprise. Check which mode your access points and staff laptops support when you build the access point inventory.
PEAP-MSCHAPv2
Protected EAP wrapping the Microsoft Challenge Handshake Authentication Protocol version 2. It tunnels a username and password inside TLS and is one of the EAP methods carried over IEEE 802.1X, as framed by the EAP specification in RFC 3748.
Many existing staff networks still use it. Review the risks before you migrate dealership staff to identity-provider-backed authentication.
Captive portal
A web page that intercepts a new client's traffic and must be completed before the device gets internet access. Devices detect it automatically through operating system probes, which a walled garden must allow before sign-in.
This is the branded lounge and showroom sign-in. If it fails to appear, the walled garden or DNS settings for your access point vendor are the usual cause.
Conscious-choice opt-ins
Purple's term for separate, unchecked consent boxes for each purpose. They are designed to meet regulatory requirements that consent is freely given, specific, informed and unambiguous, with no pre-checked boxes.
The lounge sign-in carries two: service and inspection reminders, and sales offers. A sudden jump in opt-ins at one site usually means a box has been pre-checked or tied to access.
TCPA and CAN-SPAM
The Telephone Consumer Protection Act and CAN-SPAM Act, the US federal regulations that govern electronic marketing such as email and text messaging. They sit alongside state privacy laws like the CCPA/CPRA and require appropriate consent for commercial messages to individuals.
Sales follow-up from lounge sign-ins is electronic marketing. Making WiFi access conditional on marketing consent fails both the TCPA and CAN-SPAM as well as the CCPA/CPRA.
PCI DSS segmentation
The Payment Card Industry Data Security Standard recognizes network segmentation as the way to isolate the cardholder data environment from other networks. Properly segmented systems can fall outside the scope of a PCI DSS assessment.
Card terminals belong on a wired or dedicated segment, away from guest, staff and workshop networks. Your payment provider and qualified security assessor confirm the final scope.
MAC address randomization
A privacy feature in recent iOS and Android versions that presents a private, randomized hardware identifier per network by default, instead of the device's fixed MAC address.
It makes returning visitors look new in visit counts. Use sign-in data for returning visitors and read visit counts as weekly trends.
Worked Examples
A 12-site franchised dealer group ran one shared WiFi password per dealership. Diagnostic tablets, staff laptops and lounge visitors shared one network, and group marketing had no view of lounge or showroom visits. How did the group fix this without replacing hardware?
The group kept its Cisco Meraki access points and added Purple as a cloud overlay. Each site moved to three networks: guest, staff and workshop. Staff authenticated by IEEE 802.1X against Microsoft Entra ID, so removing a leaver became a single action in Entra ID. Workshop devices received iPSK keys by device group, so one device group can be revoked without re-keying the site. The lounge sign-in asked for name, email, optional registration and two unchecked consent boxes. The outcome: 12 shared site passwords became one guest sign-in, individual staff identities and a separate key per workshop device group. Group marketing compared all 12 sites in one report, where before it had none.
A single-franchise showroom invited prospects to a model launch evening. Previous launches produced a pile of business cards and no consent records. How did the showroom capture usable leads this time?
The showroom ran an event-branded sign-in on the guest network for the evening. It carried one consent box for test-drive follow-up, so every contact arrived with a clear, specific consent. Sales staff stayed on the staff network, unaffected by attendee traffic. Every attendee contact came with a timestamped consent record and the visit date. The sales team worked the list the next morning instead of re-keying business cards. The visits by hour report showed when the floor peaked, and that set staffing for the next launch. The same guest, staff and workshop separation stayed in place throughout, so the event needed no network changes beyond the sign-in page.
Frequently asked questions
Does Purple work with the access points already installed in our dealerships?
Yes, Purple runs as a cloud overlay on access points from Cisco Meraki, HPE Aruba, Ruckus, Juniper Mist, Ubiquiti UniFi, Cambium, Extreme Networks, and Fortinet. You keep the hardware you own and point it at Purple for sign-in, authentication, and reporting. Check each site's model and firmware against Purple's support documentation during planning, because older equipment at smaller sites is the usual exception.
Is the service lounge sign-in compliant with CCPA/CPRA?
Yes, when you configure it correctly. Purple is ISO 27001 certified and CCPA/CPRA compliant, and the sign-in uses conscious-choice opt-ins: separate, un-checked boxes for each purpose. Your privacy officer should approve the consent wording and privacy policy. Never make WiFi access conditional on marketing consent, because regulations require freely given consent and the TCPA and CAN-SPAM govern electronic marketing in the US.
Can lounge sign-ins feed our CRM?
Yes, Purple integrates with CRM and marketing platforms, so consented sign-ins reach your systems without manual exports. Map the fields once: name, email, optional vehicle license plate, site, visit date, and each consent flag. Route service consent to aftersales and sales consent to the sales team. Test with one sign-in per site before go-live.
Do diagnostic tools need their own network?
Yes. Service bay devices should sit on their own VLAN, away from guest traffic. A shared network exposes diagnostic tablets to every visitor device and lets lounge streaming compete with manufacturer software downloads. Many tools cannot use IEEE 802.1X, so iPSK gives each device or device group its own key. You can then revoke one lost tablet without changing the key for the whole service department.
How does a platform compare with the free WiFi from our broadband provider?
A broadband router gives you one shared password and no data, while a platform gives you separated networks, a branded sign-in, and site reports. With a router, visitors, staff, and service devices often share one network. You hold no consent records and cannot compare sites. An auto dealership WiFi platform adds VLAN separation, 802.1X for staff, iPSK for devices, and visit reports across the group.
How long does rollout across a dealer group take?
Rollout is mainly configuration, not installation, where your access points are already supported. The work per site covers network setup, the sign-in page, service bay keys, and a test pass. Most elapsed time sits in preparation: the device inventory, consent wording, and CRM mapping. Pilot one dealership, fix the template, then apply the same configuration to every other site in the group.
Will segmentation help with PCI DSS for our card terminals?
Yes, segmentation helps. PCI DSS treats network segmentation as a way to reduce the scope of an assessment. Keep card terminals on a wired or dedicated segment, separate from the guest, staff, and service bay networks. Purple runs the guest, staff, and service networks. Your payment provider and qualified security assessor confirm the final scope of the cardholder data environment.
Sources
- IEEE 802.1X port-based network access control
- IETF RFC 2865: Remote Authentication Dial In User Service (RADIUS)
- IETF RFC 3748: Extensible Authentication Protocol (EAP)
- Regulation (EU) 2016/679, General Data Protection Regulation
- The Privacy and Electronic Communications (EC Directive) Regulations 2003
- PCI Security Standards Council: PCI DSS
- Android Open Source Project: MAC randomisation behaviour
Continue reading in this series
Cisco Spaces alternatives for mixed-vendor estates: Aruba, Ruckus, Mist and Meraki compared
You will be able to decide whether to standardize on Cisco, run each vendor's own tool or add a hardware-neutral layer across a mixed estate. You will also be able to plan a staged, eight-step move off Cisco Spaces. That move covers the captive portal, Passpoint, CRM connectors and Staff WiFi, without replacing working access points.
Visitor attraction WiFi platforms: ticket holders, annual members and dwell time by zone
Use this guide to choose a visitor attraction WiFi platform that signs day visitors in at the gate, recognizes annual pass holders by sign-in identity and reports dwell time by zone. You can then staff lines, cafes and shops against real demand. You can also invite consenting visitors back lawfully under the TCPA and CAN-SPAM.
Shopping center WiFi platforms for landlords: shared guest access and tenant footfall reports
Use this to choose a WiFi model for your shopping center, plan outdoor coverage across parking lots and walkways, and decide which footfall reports to share with tenants and leasing teams. You will also be able to set up aggregate-only tenant reporting and record consent so that you, as landlord and controller, own a lawful scheme-level visitor list.
Got questions about your specific setup?
Our team works with venue operators, IT managers, and network engineers across 80,000 venues. Book a 20-minute call and we will show you how others like you solved it.