- Purple
- Enterprise WiFi security and authentication: a complete guide
- Council WiFi procurement checklist: public WiFi, staff 802.1X and filtering across council buildings
Council WiFi procurement checklist: public WiFi, staff 802.1X and filtering across council buildings
Use this checklist to write a council WiFi tender that you can score: four separated networks, staff access tied to your identity provider, certificates on council-owned devices, filtering on every public site and plain-English ward reports. You will also know which evidence to request from bidders and which eight tests to run before go-live.
By James KeanPublished
📖 14 min read3,123 words3 worked examples12 key definitions
Part of our core series: Enterprise WiFi security and authentication: the complete guide →
- Which networks does a council WiFi tender need to cover?
- What should a council have in place before going to tender?
- How should the tender specify each council network?
- Public WiFi with a fair-use sign-in
- Staff access that follows joiners, movers and leavers
- Council-owned laptops and phones without a shared password
- Building systems and depots
- Filtering on every public council network
- Reports councillors can read
- Rollout across sites
- Tender requirements at a glance
- How do you test council WiFi before go-live?
- What goes wrong with council WiFi, and how do you fix it?
- Leavers keep access because HR updates late
- Staff use public WiFi to avoid signing in
- Encrypted DNS bypasses the filter
- Libraries report overblocking
- Certificates expire on a batch of laptops
- Building systems end up on the staff network
- The sign-in page fails people using assistive technology
- What does this look like across a council estate?
- Worked scenario 1: a district council retires its shared staff password
- Worked scenario 2: a county library and leisure service closes its filtering gap
- What does council WiFi cost, and what does it return?
- What you pay for
- What you get back
- Proof behind the platform
- Frequently asked questions
- Can Purple run on the access points our council already owns?
- Does council public WiFi need a sign-in page?
- How does council public WiFi stay compliant with UK GDPR?
- Can we move staff off a shared password or PEAP-MSCHAPv2 without disruption?
- What filtering should every council public network apply?
- How long does a council-wide WiFi rollout take?
- What should councillors see in a WiFi report?

A council WiFi tender should specify four networks. Residents and visitors get public WiFi with an accessible fair-use sign-in. Staff connect over IEEE 802.1X tied to your identity provider. Council-owned devices use certificates, and building systems sit on isolated networks. Every public network is filtered, and councillors receive plain-English reports by site and ward.
Which networks does a council WiFi tender need to cover?
Most local authority WiFi grew one building at a time. The result is often one network carrying residents, staff and CCTV together. The tender is your chance to separate it by who connects and what they need.
Four networks cover town halls, libraries, leisure sites and depots.
| Network | Who uses it | How they join | Filtering | Typical sites |
|---|---|---|---|---|
| Public WiFi | Residents and visitors | Captive portal sign-in with fair-use terms | Full public policy, including IWF list | Libraries, town hall reception, leisure centres, community hubs |
| Staff WiFi | Employees, councillors, contractors on council accounts | IEEE 802.1X with identity provider credentials | Malware and phishing, plus your acceptable use categories | Every staffed building |
| Council-owned devices | Laptops, phones and tablets issued by the council | EAP-TLS certificate installed by MDM | Staff policy | Every building, including depots |
| Building and operational systems | CCTV, door entry, building management, kiosks, depot telematics | iPSK, one key per device or group | Allow-list to required destinations only | Depots, plant rooms, libraries |
Three terms recur through this guide:
- Captive portal: the sign-in page a visitor completes before the network passes traffic.
- VLAN (virtual local area network): keeps each network's traffic apart on shared switches and access points.
- IEEE 802.1X: the standard for authenticating a device before it gets network access.
Write one isolation clause into the tender. Public traffic must never reach staff or operational VLANs.
Some buildings host partners, such as an NHS clinic inside a community hub. Keep partner traffic on its own network under the partner's controls. Our GP surgery WiFi providers checklist: patient access, clinical networks and DSPT evidence covers the clinical side. The Healthcare page covers wider NHS settings.
What should a council have in place before going to tender?
Suppliers design and price from what you give them. Gaps in the specification become contract variations later. Prepare seven things before the notice goes out.
- A site register. List every building with its access point count, model and broadband link. Note who owns the hardware and when vendor support ends.
- Your identity provider. Name it: Microsoft Entra ID, Okta or Google Workspace. Confirm that HR changes reach it the same day, because staff WiFi will follow it.
- A device inventory. Count council-owned laptops, phones and tablets. State how each group is managed today.
- A filtering policy. Agree public and staff categories with your senior information risk owner (SIRO) and service leads.
- A data protection impact assessment (DPIA). The public sign-in processes personal data under UK GDPR. The ICO describes a DPIA as good practice for any major project involving personal data.
- An accessibility owner. Treat the sign-in page as council web content under the Public Sector Bodies (Websites and Mobile Applications) (No. 2) Accessibility Regulations 2018.
- Member reporting needs. Ask the relevant committee what it wants each month, before suppliers propose dashboards.
Council WiFi procurement started after 24 February 2025 falls under the Procurement Act 2023. Write each requirement below as a criterion you can score, not an aspiration. For the controls that surround these networks, see Securing a business network: A practical guide for 2026.
How should the tender specify each council network?
Public WiFi with a fair-use sign-in
Council public WiFi exists to give residents and visitors fair access. It is not there to collect data. Write the sign-in requirement around that purpose.
Ask for:
- Fair-use limits set per site. These cover session length, per-device bandwidth and a daily allowance. A library and a leisure centre need different limits.
- Terms of use. Visitors accept them at first sign-in and again when they change.
- A no-email route. People with no email address or phone need a terms-only click-through.
- Conscious-choice opt-ins. Newsletter consent is separate, unticked and optional.
- Minimal data. The DPIA records a stated retention period and deletion on request.
- WCAG 2.2 level AA conformance. The 2018 regulations set WCAG 2.1 AA as the legal floor. Central government monitoring has tested against 2.2 since October 2024.
- Language options that match your residents.
Purple Access runs Guest WiFi sign-in across every council building from a single pane of glass. Ask every bidder to demonstrate each fair-use control live at clarification stage.
A library service may want consented sign-ups to feed its events newsletter. 8 smart integration ideas to connect guest WiFi and CRM shows how that works.
Staff access that follows joiners, movers and leavers
On WiFi, IEEE 802.1X makes each device authenticate before it receives an address. A RADIUS server is the authentication service that checks the credential and returns the network policy.
Tie the staff network to your identity provider. Joiners, movers and leavers (JML) then run through a process you already operate.
- Joiner: HR creates the account, and WiFi works on day one with no ticket.
- Mover: a group change moves the person to a new VLAN or policy. A housing officer who moves to finance gets finance access, not both.
- Leaver: disabling the account ends network access. Nobody changes a shared key.
Ask the tender for:
- Named integrations with Microsoft Entra ID, Okta and Google Workspace.
- A maximum time from account disable to network refusal. Write it into the contract.
- SCIM or an equivalent directory sync. SCIM (System for Cross-domain Identity Management) is the standard for syncing accounts between systems.
- SAML single sign-on for the admin console. SAML (Security Assertion Markup Language) means your engineers and supplier staff use named accounts.
- Time-bound accounts for contractors and agency staff, expiring automatically.
- A separate group for councillors, with a policy you set.
Purple Access builds Identity-Based Networks on cloud RADIUS. Staff access follows the identity provider, not a password pinned to a noticeboard.
Council-owned laptops and phones without a shared password
A shared password on council devices fails twice. You cannot revoke it for one person, and every leaver walks out knowing it.
Certificates fix both problems. EAP-TLS (Extensible Authentication Protocol with Transport Layer Security) authenticates a device with a certificate instead of a password. Each device holds its own certificate, so you revoke one without touching the rest. Pair it with WPA3-Enterprise wherever your access points and devices support it.
Purple MDM enrols council-owned laptops and phones and installs the certificate and WiFi profile. The device joins the staff network automatically, with nothing to type. If someone loses a phone, revoke its certificate and it stops connecting.
Many councils still run PEAP-MSCHAPv2, a password-based method with known weaknesses. PEAP-MSCHAPv2: Why It Is Still Common, Why It Is Risky, and How to Move On explains the migration path.
| Method | Credential | Removing one leaver | Standard | Suits |
|---|---|---|---|---|
| Shared WPA2-PSK | One password for everyone | Change the password on every device | IEEE 802.11i | Nothing on a council staff network |
| PEAP-MSCHAPv2 | Account name and password | Disable the account | IEEE 802.1X | Legacy estates during migration only |
| EAP-TLS | Per-device certificate | Revoke the device certificate | IEEE 802.1X, IETF RFC 5216 | Council-owned laptops and phones |
| iPSK | Unique key per device or group | Delete that key | Vendor implementations on WPA2-Personal | CCTV, door entry, kiosks, telematics |
Building systems and depots
Depots and leisure plant rooms are full of devices that cannot do 802.1X. Typical examples are CCTV, door entry, building management controllers and self-service library kiosks.
Use iPSK (identity pre-shared key), where every device or group gets its own key on one network name. Put each group on its own VLAN. Allow it to reach only the destinations it needs. A compromised camera then cannot reach the staff network.
Filtering on every public council network
Councils are specified authorities under the Prevent duty in the Counter-Terrorism and Security Act 2015. Home Office guidance expects local authorities to consider filtering on IT that the public can use. An unfiltered public network is hard to defend at scrutiny.
Specify filtering on every public network at every site. Make no exception for small buildings. Ask for:
- Child sexual abuse content blocked using the Internet Watch Foundation (IWF) URL list.
- Terrorist and extremist content blocked in line with your Prevent policy.
- Adult content blocked on all public networks.
- Malware and phishing protection on public and staff networks.
- A stated method for encrypted DNS, which can bypass basic DNS filters.
- An unblock request route with a response time. Library visitors researching health or legal topics should not be overblocked.
- Reports by category and site, never by named individual.
Friendly WiFi is a UK accreditation for public WiFi that filters pornography and child sexual abuse content. Ask bidders whether their filtering meets it.
Purple Shield applies filtering on both public and staff networks, so one tender line covers both.
Reports councillors can read
Councillors do not need an analytics console. They need one page per ward each month. That page answers three questions: is it used, is it working, and is it safe?
Specify:
- Usage: sessions and unique devices per site and ward, month on month.
- Peak hours by site, to inform opening times and staffing.
- Uptime per site against the contract SLA.
- Filtering events by category, as counts.
- No personal data in any member report.
- CSV export for freedom of information requests and audit.
WiFi Analytics reports on visits and connection patterns across every site. Ask each bidder for a sample ward report at tender stage, then score it.
Rollout across sites
Purple is hardware-agnostic and runs as a cloud overlay. It works on Cisco Meraki, HPE Aruba, Ruckus, Juniper Mist, Ubiquiti UniFi, Cambium, Extreme and Fortinet. Keep access points that are still in vendor support. Why your next WiFi upgrade doesn't need new hardware sets out the case.
Ask the tender for:
- A four-site pilot: the town hall, your busiest library, a leisure centre and a depot.
- Waves grouped by building type, so each wave reuses one tested configuration.
- A parallel run of old and new staff networks, with a published sunset date.
- Out-of-hours cutover at libraries and leisure centres.
- A named supplier project lead, with per-site acceptance sign-off before the next wave.
Tender requirements at a glance
| Requirement | What to ask the supplier | Evidence to request |
|---|---|---|
| Public sign-in accessibility | Conformance to WCAG 2.2 AA | Recent independent accessibility audit |
| Fair-use controls | Per-site session, bandwidth and daily limits | Live demonstration at clarification |
| Joiners, movers, leavers | Microsoft Entra ID, Okta, Google Workspace integration and disable-to-refusal time | Leaver test on a demo account |
| Council-owned devices | EAP-TLS certificates installed by MDM | Enrolment of one laptop and one phone |
| Building systems | iPSK on segregated VLANs | Configuration walkthrough |
| Filtering | IWF list, Prevent categories, encrypted DNS handling | Category list and test results |
| Member reporting | Monthly ward reports with no personal data | Sample ward report |
| Hardware | Named supported vendors | Published vendor list |
| Security assurance | ISO 27001 and Cyber Essentials | Current certificates |
| Availability | Platform uptime SLA | Contract SLA figure |
Got questions about your specific setup?
Our team works with venue operators, IT managers, and network engineers across 80,000 venues. Book a 20-minute call and we will show you how others like you solved it.
How do you test council WiFi before go-live?
Run these tests at every pilot site, then sample them in each wave. Write the pass criteria into the contract.
- Leaver test. Disable a test account. The device must be refused within the contracted time.
- Mover test. Change the account's group. The device must land on the new VLAN.
- Lost device test. Revoke a phone's certificate. The phone must fail to reconnect.
- Isolation test. From the public network, try to reach a staff file server. The attempt must fail.
- Filtering test. Use supplier test addresses for each category. Repeat with encrypted DNS turned on.
- Accessibility test. Complete sign-in with NVDA, JAWS, VoiceOver, keyboard only and 200% zoom.
- Fair-use test. Exceed the daily allowance on a test device. The limit must apply.
- Report test. Generate a ward report. Confirm it contains no personal data.
What goes wrong with council WiFi, and how do you fix it?
Leavers keep access because HR updates late
The network can only follow the identity provider. If HR disables accounts a week late, so does WiFi. Fix the HR-to-identity feed first, then hold the supplier to the disable-to-refusal time.
Staff use public WiFi to avoid signing in
Staff do this when the staff network is harder to join than the public one. Certificate-based access removes the friction, because enrolled devices connect automatically. Tell staff that council business stays on the staff network.
Encrypted DNS bypasses the filter
Modern browsers can send DNS requests over HTTPS, which skips basic DNS filters. Ask the supplier how they handle it, and include it in the filtering test.
Libraries report overblocking
Health, sexual health and legal advice pages sometimes fall into blocked categories. Publish the unblock route at the library desk. Review requests within the contracted response time.
Certificates expire on a batch of laptops
Devices enrolled on the same day often expire on the same day. Require MDM renewal well before expiry, plus an expiry report each month.
Building systems end up on the staff network
This usually happens when a contractor installs a device and needs it working that afternoon. Make iPSK onboarding part of your facilities contracts, with a named contact who issues keys.
The sign-in page fails people using assistive technology
Image CAPTCHAs, unlabelled fields and timeouts lock people out. Test with screen readers before go-live, not after a complaint.
What does this look like across a council estate?
The two worked scenarios below are illustrative, built on typical estates. Every outcome follows directly from the design, not from a vendor survey.
Worked scenario 1: a district council retires its shared staff password
Situation. A district council runs 26 buildings with 1,200 staff. Staff WiFi uses one WPA2 password, changed every six months. Last year 130 people left. Each one kept a working key until the next change.
What was done. The council moved staff WiFi to 802.1X tied to Microsoft Entra ID. It enrolled 900 council laptops and phones with Purple MDM onto EAP-TLS. The shared password was retired after a 30-day parallel run.
Outcome.
- Password changes: down from two a year to zero.
- Manual device updates: 1,800 a year (900 devices, twice a year) eliminated.
- Leaver exposure: down from up to six months to the contracted disable-to-refusal time. None of the 130 annual leavers now leaves with a working key.
Worked scenario 2: a county library and leisure service closes its filtering gap
Situation. A county runs 38 libraries and six leisure centres. Filtering covered the libraries but not the leisure sites. The sign-in page failed a keyboard-only test. Officers answered councillors' usage questions by hand.
What was done. The county deployed one sign-in across all 44 sites, tested to WCAG 2.2 AA. It applied Purple Shield to all 44 public networks. Each ward now receives a scheduled monthly report.
Outcome.
- Filtering coverage: up from 38 of 44 public networks to 44 of 44.
- Accessibility: the sign-in now passes keyboard and screen reader tests.
- Member reporting: ad hoc councillor requests replaced by one report per ward each month.
What does council WiFi cost, and what does it return?
What you pay for
Cost sits in four lines:
- The platform plan: Connect, Capture or Engage.
- Add-ons: Purple Shield for filtering and Purple MDM for devices.
- Hardware, only where access points are out of vendor support.
- Your internal time for identity integration, device enrolment and staff communications.
Ask every bidder to price per site. You can then add a new building at a known rate.
What you get back
- No password rotations, and no leaver walking out with a working key.
- One platform across every building, not a different arrangement per service.
- Filtering evidence for Prevent and scrutiny at every public site.
- Member reports produced on schedule, not collated by hand.
- Existing access points kept, so capital goes to buildings that need it.
Proof behind the platform
Purple was founded in 2012 and runs in 80,000+ live venues across more than 90 countries. It handles 500 million users and logins a year. The platform delivers 99.999% uptime, based on Purple's own platform data. Purple is ISO 27001 certified and holds Cyber Essentials and B Corp certification. It is GDPR and CCPA compliant.
Frequently asked questions
Can Purple run on the access points our council already owns?
Yes. Purple is hardware-agnostic and runs as a cloud overlay on Cisco Meraki, HPE Aruba, Ruckus, Juniper Mist, Ubiquiti UniFi, Cambium, Extreme and Fortinet. You keep access points that are still in vendor support and replace only those that are not. A council WiFi tender can then separate the platform decision from the hardware refresh. Each building's replacements can follow their own timetable.
Does council public WiFi need a sign-in page?
Yes. The sign-in page is where visitors accept your terms of use and where fair-use limits apply. It can stay light: a terms-only click-through works for people without an email address. Keep any marketing consent separate and optional. Build the page to WCAG 2.2 AA so people using screen readers or keyboards can connect unaided.
How does council public WiFi stay compliant with UK GDPR?
Collect only what the service needs, and say why. Record the lawful basis and retention period in a DPIA. Keep newsletter consent as an unticked conscious-choice opt-in, and delete data on request. Purple is ISO 27001 certified, holds Cyber Essentials and is GDPR compliant. Member reports should carry counts only, never named individuals.
Can we move staff off a shared password or PEAP-MSCHAPv2 without disruption?
Yes, if you run old and new networks side by side. Enrol council-owned devices with Purple MDM so they receive certificates and join the new staff network automatically. Keep the old network live for a published period and monitor remaining connections, then switch it off. Staff on enrolled devices notice only that they no longer type a password.
What filtering should every council public network apply?
At minimum, block child sexual abuse content using the IWF list. Also block terrorist and extremist content in line with your Prevent policy, adult content, and malware and phishing sites. Apply filtering at every public site, including small community buildings. Ask how the supplier handles encrypted DNS. Set an unblock route with a response time so library research is not overblocked.
How long does a council-wide WiFi rollout take?
Plan a pilot plus waves, not a single cutover. Pilot four representative sites first: the town hall, your busiest library, a leisure centre and a depot. Then roll out by building type. Because Purple runs on existing access points, identity and device enrolment work sets the pace, not hardware deliveries. Require per-site sign-off before each wave starts.
What should councillors see in a WiFi report?
Councillors should see one page per ward each month. It shows sessions, unique devices, peak hours, uptime against the contract SLA and filtering events by category. No personal data appears in member reports. Ask every bidder for a sample ward report at tender stage and score it. A report councillors cannot read simply generates manual requests instead.
Key Definitions
IEEE 802.1X
The IEEE standard for port-based network access control. It carries EAP between the device, the access point and an authentication server, so a device must authenticate before it receives network access.
The basis of council Staff WiFi. Specifying 802.1X lets network access follow the identity provider, so joiners, movers and leavers are handled by a process HR already runs.
RADIUS
Remote Authentication Dial-In User Service, the IETF protocol an 802.1X authenticator uses to send credentials to an authentication server, which accepts or rejects them and returns the network policy, such as a VLAN assignment.
Purple Access runs on cloud RADIUS. It is the service that refuses a disabled account and places a moved employee on the right VLAN, so its disable-to-refusal time belongs in the contract.
EAP-TLS
Extensible Authentication Protocol with Transport Layer Security, defined in IETF RFC 5216. The device and server authenticate each other with certificates, so no password is exchanged.
The method for council-owned laptops and phones. Each device holds its own certificate, so you revoke one lost phone without touching the rest of the estate.
PEAP-MSCHAPv2
Protected EAP wrapping Microsoft's MS-CHAPv2 challenge-response, a password-based 802.1X method that relies on account name and password inside a TLS tunnel and has known weaknesses.
Common in legacy council estates. The tender should treat it as a migration-only method, with a parallel run and a published sunset date.
iPSK (identity pre-shared key)
A vendor implementation on WPA2-Personal that gives each device or group its own pre-shared key on a single network name, with the key mapped to a VLAN or policy.
Used for CCTV, door entry, building management controllers, kiosks and depot telematics that cannot do 802.1X. Deleting one key removes one device without disturbing others.
VLAN (virtual local area network)
A logical network defined by IEEE 802.1Q tagging that keeps each network's traffic apart on shared switches and access points.
The isolation clause in the tender depends on VLANs. The isolation test at go-live checks that the public network cannot reach a staff file server.
Captive portal
The sign-in page a visitor completes before the network passes traffic, where terms of use are accepted and fair-use limits are applied.
The public face of council WiFi. It is council web content, so it must meet the accessibility regulations and offer a terms-only route for people without an email address.
SCIM
System for Cross-domain Identity Management, the IETF standard (RFC 7643 schema, RFC 7644 protocol) for provisioning and deprovisioning accounts between an identity provider and other systems.
Ask for SCIM or an equivalent directory sync so account changes in Microsoft Entra ID, Okta or Google Workspace reach the WiFi platform without manual steps.
SAML
Security Assertion Markup Language, the OASIS standard (SAML 2.0) for exchanging authentication assertions between an identity provider and a service to deliver single sign-on.
Specify SAML single sign-on for the admin console so council engineers and supplier staff use named accounts rather than shared logins.
WCAG 2.2 level AA
The W3C Web Content Accessibility Guidelines version 2.2 at conformance level AA. The Public Sector Bodies (Websites and Mobile Applications) (No. 2) Accessibility Regulations 2018 set WCAG 2.1 AA as the legal floor.
Specify 2.2 AA for the public sign-in page, since central government monitoring has tested against 2.2 since October 2024. Request a recent independent audit as evidence.
DPIA (data protection impact assessment)
An assessment under UK GDPR Article 35 of the risks a processing activity poses to individuals. The ICO describes it as good practice for any major project involving personal data.
The public sign-in processes personal data, so the DPIA records the lawful basis, a stated retention period and deletion on request before the tender is issued.
Prevent duty
The duty in section 26 of the Counter-Terrorism and Security Act 2015 for specified authorities, including local authorities, to have due regard to preventing people being drawn into terrorism.
Home Office guidance expects councils to consider filtering on IT the public can use, which is why the tender requires filtering at every public site.
Worked Examples
A district council runs 26 buildings with 1,200 staff on one WPA2 password changed every six months. Last year 130 people left, and each kept a working key until the next change. How should it fix leaver exposure?
The council moved Staff WiFi to IEEE 802.1X tied to Microsoft Entra ID, so disabling an account in the identity provider now ends network access. It enrolled 900 council laptops and phones with Purple MDM onto EAP-TLS, giving each device its own certificate that can be revoked individually. The shared password ran in parallel for 30 days, then was retired. Password changes fell from two a year to zero, and 1,800 manual device updates a year were eliminated. Leaver exposure dropped from up to six months to the contracted disable-to-refusal time, so none of the 130 annual leavers now leaves with a working key.
A county runs 38 libraries and six leisure centres. Filtering covers the libraries but not the leisure sites, the sign-in page fails a keyboard-only test, and officers answer councillors' usage questions by hand. What should change?
The county deployed one sign-in across all 44 sites and tested it to WCAG 2.2 AA, so the same accessible page serves every building. It applied Purple Shield to all 44 public networks, closing the gap at the leisure centres with one consistent filtering policy. It also scheduled a monthly report for each ward. Filtering coverage rose from 38 of 44 public networks to 44 of 44. The sign-in now passes keyboard and screen reader tests. Ad hoc councillor requests were replaced by one report per ward each month, which carries counts only and no personal data.
A contractor installs a new door entry controller at a depot and needs it working that afternoon, so it ends up on the staff network. How do you stop this recurring?
Building systems should never share the staff network, because a compromised device could then reach staff services. Make iPSK onboarding part of your facilities contracts, with a named contact who issues keys. Each device or group gets its own key on one network name, lands on its own VLAN and is allowed to reach only the destinations it needs. The contractor gets a working connection the same day without touching staff credentials. If the device is later removed or compromised, deleting its key cuts it off without affecting any other system on the site.
Frequently asked questions
Can Purple run on the access points our council already owns?
Yes. Purple is hardware-agnostic and runs as a cloud overlay on Cisco Meraki, HPE Aruba, Ruckus, Juniper Mist, Ubiquiti UniFi, Cambium, Extreme and Fortinet. You keep access points that are still in vendor support and replace only those that are not. A council WiFi tender can then separate the platform decision from the hardware refresh. Each building's replacements can follow their own timetable.
Does council public WiFi need a sign-in page?
Yes. The sign-in page is where visitors accept your terms of use and where fair-use limits apply. It can stay light: a terms-only click-through works for people without an email address. Keep any marketing consent separate and optional. Build the page to WCAG 2.2 AA so people using screen readers or keyboards can connect unaided.
How does council public WiFi stay compliant with UK GDPR?
Collect only what the service needs, and say why. Record the lawful basis and retention period in a DPIA. Keep newsletter consent as an unticked conscious-choice opt-in, and delete data on request. Purple is ISO 27001 certified, holds Cyber Essentials and is GDPR compliant. Member reports should carry counts only, never named individuals.
Can we move staff off a shared password or PEAP-MSCHAPv2 without disruption?
Yes, if you run old and new networks side by side. Enrol council-owned devices with Purple MDM so they receive certificates and join the new staff network automatically. Keep the old network live for a published period and monitor remaining connections, then switch it off. Staff on enrolled devices notice only that they no longer type a password.
What filtering should every council public network apply?
At minimum, block child sexual abuse content using the IWF list. Also block terrorist and extremist content in line with your Prevent policy, adult content, and malware and phishing sites. Apply filtering at every public site, including small community buildings. Ask how the supplier handles encrypted DNS. Set an unblock route with a response time so library research is not overblocked.
How long does a council-wide WiFi rollout take?
Plan a pilot plus waves, not a single cutover. Pilot four representative sites first: the town hall, your busiest library, a leisure centre and a depot. Then roll out by building type. Because Purple runs on existing access points, identity and device enrolment work sets the pace, not hardware deliveries. Require per-site sign-off before each wave starts.
What should councillors see in a WiFi report?
Councillors should see one page per ward each month. It shows sessions, unique devices, peak hours, uptime against the contract SLA and filtering events by category. No personal data appears in member reports. Ask every bidder for a sample ward report at tender stage and score it. A report councillors cannot read simply generates manual requests instead.
Sources
- IETF RFC 5216: The EAP-TLS authentication protocol
- IETF RFC 7643: SCIM core schema
- W3C Web Content Accessibility Guidelines (WCAG) 2.2
- Public Sector Bodies (Websites and Mobile Applications) (No. 2) Accessibility Regulations 2018
- Procurement Act 2023
- Counter-Terrorism and Security Act 2015
- ICO guidance: Data protection impact assessments
- Internet Watch Foundation
Continue reading in this series
Multi-academy trust WiFi procurement checklist: KCSIE filtering, staff 802.1X and managed devices
Use this checklist to write one WiFi specification that every school in your trust can meet. You can decide how staff and trust-owned devices authenticate with 802.1X certificates, and how pupils, visitors and building devices are separated. You can also set filtering and DSL reporting that meet KCSIE and the DfE filtering and monitoring standards.
GP surgery WiFi providers checklist: patient access, clinical networks and DSPT evidence
Use this checklist to choose a GP surgery WiFi provider that keeps patient WiFi away from clinical systems, gives every salaried GP, locum and visiting clinician an individual, revocable credential, and runs on your existing access points. You will also know which six tests to run and which records to keep for your annual DSPT submission.
Further education college WiFi procurement: student BYOD, staff 802.1X and KCSIE filtering
You will be able to specify how learners, staff and college-owned devices authenticate in an FE college WiFi tender, and how filtering meets the DfE filtering and monitoring standards. The guide sets out per-learner iPSK, staff EAP-TLS, visitor captive portals, age-based filtering profiles and the bid evidence to request, so you can score tenders on safeguarding and five-year cost.
Got questions about your specific setup?
Our team works with venue operators, IT managers, and network engineers across 80,000 venues. Book a 20-minute call and we will show you how others like you solved it.