Skip to main content

Shopping center WiFi platforms: shopper sign-in, tenant networks and footfall by mall

You will be able to choose one hardware-agnostic platform that signs shoppers in, separates tenant and management networks, and reports footfall, dwell and repeat visits by zone. You will also know how to scope zones, sign-in fields, tenant keys and reports, and how to test WiFi counts against door counters before rolling out across your portfolio.

By Gavin WheeldonPublished
📖 14 min read3,151 words3 worked examples12 key definitions

Video overview

Shopping center WiFi platforms: shopper sign-in, tenant networks and footfall by mall

The right shopping mall WiFi platform does three jobs on the access points you already own. It signs shoppers in with one step across malls, food courts, and parking lots. It gives each retail tenant and mall management a separate private network. It reports foot traffic, dwell, and repeat visits by zone, so asset and leasing teams can compare malls.

Which shopping mall WiFi platform should you choose?

Choose one hardware-agnostic platform that handles shopper sign-in, tenant networks, and zone reporting together. Splitting the jobs across separate tools gives you three contracts and three data sets that never join up. The usual split is a vendor splash page, a spreadsheet of tenant passwords, and a separate people counter. With that setup, your asset team cannot see whether a busy food court feeds the fashion mall next to it.

A shopping mall puts more stakeholders on one network than almost any other venue:

  • Marketing wants a consented shopper list.
  • Mall management needs secure access for security, cleaning, and facilities staff.
  • Tenants need a private network for POS terminals, inventory devices, and staff.
  • Asset and leasing teams want evidence they can show a prospective tenant or an investor.

Purple runs as a cloud overlay on Cisco Meraki, HPE Aruba, Ruckus, Juniper Mist, Ubiquiti UniFi, Cambium, Extreme, and Fortinet access points. You keep the hardware already installed in each mall. The jobs map to Purple products as follows:

Purple was founded in 2012 and runs across 80,000+ live venues in over 90 countries. It handles 500 million users and logins a year. The platform is ISO 27001 and Cyber Essentials certified, CCPA/CPRA compliant, and backed by 99.999% uptime. Retail venues on Purple include Harrods and Tapestry; see Retail for the wider sector picture.

Option Shopper sign-in Tenant and management networks Foot traffic, dwell, and repeat visits by zone Multi-mall view Hardware needed
Access point vendor's built-in splash page Basic click-through or form, configured per site Separate SSIDs or keys configured manually on each controller Connection counts per access point, no consented identity Limited to one vendor's estate Existing access points
Standalone people counters (beam or camera) None None Entry counts at doors, no repeat-visit identity Per-sensor dashboards Sensors at every entrance and zone boundary
Separate tools stitched together Third-party captive portal Shared or per-tenant passwords managed by IT Portal data and counter data held apart Manual export and merge Existing access points plus sensors
Purple One-step sign-in with conscious-choice opt-ins, recognized on return Private network per tenant, 802.1X for center staff Footfall, dwell, new and repeat visits by zone and by center One dashboard across centers and hardware brands Existing access points from the eight vendors named above

Where shopping center WiFi platforms genuinely differ

Most platforms can show a splash page. The real differences show up in five places. These are coverage design, the sign-in form, tenant separation, the reports, and how the platform handles randomized device addresses.

How should you cover malls, food courts and parking lots?

Treat each area as a separate zone with its own design target. Mall concourses need even coverage for moving shoppers. Food courts need capacity. Parking lots need coverage where shoppers stop.

  • Malls and concourses. Shoppers move between access points constantly. Use one shopper SSID across the whole center. A device that signs in at the north entrance then stays connected at the south entrance.
  • Food courts. Dwell is longest here, and density peaks at lunchtime. Plan for capacity, not just coverage. Favor IEEE 802.11ax (WiFi 6) access points, which the standard designed for efficiency in dense deployments.
  • Parking lots. Concrete decks and low ceilings limit range, so blanket coverage is rarely worth the cabling. Cover pay stations, elevator lobbies and pedestrian exits with outdoor-rated access points. A shopper who signs in while paying for parking is then recognized the moment they reach the mall.

Assign every access point to a named zone during deployment, such as "Food court", "Parking lot level 2" or "East mall upper". Zone reports are only as good as this mapping. Setting it up on day one costs far less than rebuilding it later.

What should the shopper sign-in ask for?

Ask for the least you need, then recognize the shopper so they rarely see the form again. Data minimization requires asking only for essential details. Every extra field also costs you sign-ins.

A practical center form has four elements:

  1. An email address, or a social or one-tap sign-in option.
  2. A zip code, marked optional. This gives your asset team catchment data without asking for a full address.
  3. Acceptance of the terms of use, required for access.
  4. Marketing consent as a separate, unchecked box.

That fourth element is a conscious-choice opt-in. Applicable privacy regulations state consent must be freely given, so access cannot be conditional on agreeing to marketing. The TCPA and CAN-SPAM apply strict consent standards to marketing communications.

Leave out date of birth, gender and phone number unless a specific campaign needs them. A returning shopper should connect automatically on later visits, at any center in your portfolio. That recognition is what makes repeat-visit reporting possible. The consented list then becomes first-party data your marketing team owns. First party data strategy for US venues covers how to put it to work.

How do you keep tenant networks separate from shopper and management networks?

Run three classes of network, each segmented from the others.

  • Shopper network. Shoppers sign in through a captive portal, the web page a device sees before it is allowed online. Turn client isolation on so shopper devices cannot see each other.
  • Tenant networks. Give each tenant its own private network on its own VLAN. A VLAN is a virtual LAN, defined in IEEE 802.1Q, that keeps traffic logically separate on shared cabling.
  • Center management network. Staff authenticate with IEEE 802.1X, the port-based network access control standard. A RADIUS server (the service that checks credentials) validates each login against Microsoft Entra ID, Okta or Google Workspace. When HR disables a leaver's directory account, their network access goes with it.

Avoid broadcasting a separate SSID for every shop. Each extra SSID adds beacon traffic and consumes airtime that a busy center cannot spare. Use iPSK (identity pre-shared key, also called PPSK) instead. With iPSK, one tenant SSID carries many keys. Each tenant gets its own key, and that key places its devices into the tenant's VLAN.

Purple's Identity-Based Networks give each tenant this kind of private network bubble on shared infrastructure. When a tenant leaves, you revoke one key. The other tenants notice nothing.

Card payments raise the stakes. The PCI Security Standards Council treats network segmentation as a way to reduce the scope of a cardholder data environment under PCI DSS. Each tenant remains responsible for its own compliance. Your job is to make sure no shopper or neighboring tenant can reach its devices. Securing a business network: A practical guide for 2026 covers segmentation in more depth.

Which footfall, dwell and repeat-visit reports help asset and leasing teams?

Agree the reports with asset and leasing before go-live, not after. Each report should answer a question someone already asks in a quarterly review.

Report Question it answers Who uses it
Footfall by zone and hour Which zones are busiest, and when? Center manager, operations
Dwell time by zone Where do shoppers stay, and where do they pass through? Leasing team
Repeat-visit rate and visit frequency How many shoppers return, and how often? Asset manager, marketing
New versus returning visitors Is the center growing its audience or relying on regulars? Head of marketing
Event period versus baseline Did the atrium event change footfall or repeat visits? Marketing, center manager
Center-by-center comparison Which centers in the portfolio are gaining or losing visits? Asset manager, investors

Dwell by zone is the report leasing teams use most. It shows where a unit's neighbors hold shoppers' attention, which supports leasing and repositioning decisions. Repeat-visit frequency matters more to asset managers. A center that holds its regulars is a steadier income than one relying on one-off visits.

How accurate are WiFi visit counts with randomized device addresses?

WiFi counts are accurate for trends, dwell and repeat visits when they come from signed-in devices. They are unreliable when they rest on passive detection alone.

Phones constantly send probe requests looking for known networks. Current iOS and Android devices randomize the hardware (MAC) address in those probes. A passive counter can therefore count one phone several times. Randomization also applies once a device connects:

  • Android 10 and later use a randomized MAC address per network by default, according to Android's developer documentation.
  • Apple has used a private address per network since iOS 14. iOS 18 added a rotating option that changes the address periodically.

The MAC address alone is therefore not a stable identifier for repeat visits. Purple anchors repeat visits to the signed-in identity instead. When a shopper signs in with an email address, their return visit counts as a repeat, whatever address the phone presents. Passpoint (also called Hotspot 2.0) and OpenRoaming go further. Both let a device join automatically using installed credentials rather than a MAC address.

Two caveats remain. WiFi counts connected devices, not every person, because not every shopper connects. Children and shoppers without phones never appear. If investors need absolute entry figures, keep door counters on the main entrances. Then use WiFi for dwell, zones and repeat visits, applying the counter-to-WiFi ratio for scale. Ask every platform you shortlist exactly how its counts handle randomized addresses.

Got questions about your specific setup?

Our team works with venue operators, IT managers, and network engineers across 80,000 venues. Book a 20-minute call and we will show you how others like you solved it.

Where each option fits

Map your situation to the approach that fits it. Every row assumes you keep the access points you already have.

Your situation Recommended approach Why it fits
Portfolio of centers on mixed access point brands Purple across every center One sign-in, one consented list and one report regardless of hardware
Tenants sharing a single password Purple Multi-Tenant WiFi with a key per tenant Revoke one tenant without disturbing the rest
Investors require absolute entry figures Door counters at main entrances plus Purple WiFi Analytics Counters give entries; WiFi adds dwell, zones and repeat visits
Marketing wants audiences for events and promotions Purple Engage plan A consented shopper list for center events and offers
Center staff share the tenant or shopper network Purple Staff WiFi with 802.1X against Microsoft Entra ID, Okta or Google Workspace Access follows the directory, so leavers lose it automatically
Shoppers lose connection between parking lot and mall Outdoor access points at pay stations and elevator lobbies on the same shopper SSID Sign-in happens once, before the shopper reaches the doors

Retail destinations outside malls follow the same pattern. Garden center WiFi platforms: visitor sign-in, cafe foot traffic and repeat-visit reports applies it to a single-site venue.

The three scenarios below use illustrative figures to show the method. They are not published Purple case studies.

Worked scenario: a regional center with a multi-story parking garage

Situation. A 120-unit center has two malls, a food court and an 1,800-space parking lot. Its vendor splash page asked for six fields, so few shoppers signed in. The leasing team had only annual door-counter totals to work with.

What was done. The center cut the form to email, optional zip code and a separate marketing box. Returning devices were recognized automatically. Outdoor access points went in at four pay stations and the elevator lobbies. Every access point was mapped to one of eight zones.

Outcome. After one quarter, the zone report showed food court dwell averaging 47 minutes, against 21 minutes in the upper mall. The leasing team used that gap to market two vacant units beside the food court as leisure leases. Parking lot sign-ins fed straight into mall visit counts, so shoppers were no longer counted twice.

Worked scenario: a city-owned downtown shopping center

Situation. A city-owned center had 40 independent tenants sharing one WiFi password. Center staff used the same network. Each time a tenant left, the city changed the password, and 39 tenants had to reconnect every device.

What was done. Each tenant received its own iPSK key mapped to its own VLAN. Center staff moved to 802.1X authenticated against Microsoft Entra ID. The shopper network was isolated from both. The city's procurement followed the structure in Council WiFi procurement checklist: public WiFi, staff 802.1X and filtering across council buildings.

Outcome. A tenant departure now means revoking one key, instead of re-keying 39 tenants. Staff leavers lose access when their Entra ID account is disabled, with no separate network task.

Worked scenario: a six-week winter event in the atrium

Situation. A center's events team needed to show the asset manager whether a six-week winter event in the atrium was worth repeating.

What was done. The atrium was set up as its own zone. The team compared the event period with the six weeks before. They invited shoppers on the consented list through the Engage plan.

Outcome. Atrium foot traffic rose 30% against the baseline, and the repeat-visit rate across the center rose by four points. The asset manager approved the event for the following year on the strength of those two numbers.

What each one costs to run

License price is only part of the cost of a shopping center WiFi platform. The larger costs sit in hardware, staff time and the work of turning data into a report someone will read.

Cost line Vendor splash page People counters only Stitched tools Purple
New hardware None Sensor per entrance and zone boundary Sensors plus portal hosting None beyond coverage gaps, usually parking lots
Contracts to manage One, inside the access point license One Three One
Work when one tenant leaves Manual change on each site's controller No tenant networks provided Password change and re-issue to remaining tenants One key revoked
Report preparation Manual export per site Manual export per sensor dashboard Manual merge of two data sets One dashboard across centers

Four running costs deserve attention when you build the business case.

  • Hardware. Purple layers on top of existing infrastructure, so there is no rip and replace. New spend usually goes on coverage gaps, most often in parking lots. Why your next WiFi upgrade doesn't need new hardware sets out the reasoning.
  • Licenses. Purple is sold on three plans: Connect, Capture and Engage. You pay for the jobs you need and add Engage when marketing is ready to use the shopper list.
  • Staff time. Shared tenant passwords and manual report merges cost hours every month. Per-tenant keys and one dashboard remove both tasks.
  • Compliance. Every supplier holding shopper data needs due diligence. One ISO 27001-certified, CCPA/CPRA-compliant supplier means one assessment, not three.

How to decide for your estate

Work through these steps for each center before you sign a contract.

  1. Map the zones. Draw every mall, food court, atrium and parking lot level as a zone. Note where shoppers stop, such as pay stations and elevator lobbies.
  2. Audit the hardware. List the access point vendor and model in each center. Confirm each is on the supported list: Cisco Meraki, HPE Aruba, Ruckus, Juniper Mist, Ubiquiti UniFi, Cambium, Extreme or Fortinet.
  3. List the tenants. Record which tenants use center WiFi, which take card payments over it, and how keys are issued today.
  4. Set the sign-in fields with your data protection officer. Agree the minimum fields, the optional zip code and the wording of the marketing opt-in.
  5. Agree the reports. Sit down with asset, leasing and marketing. Pick the six reports they will use and the zones each one covers.
  6. Pilot one center. Run WiFi counts alongside door counters for four weeks. Set the ratio you will use to scale WiFi figures across the portfolio.
  7. Roll out center by center. Reuse the zone naming and form so reports compare like with like.

The deciding test is simple to apply. Can one platform show a returning shopper's visits across every center, on every hardware brand, by zone, without a spreadsheet? If it can, it does all three jobs.

Frequently asked questions

Does Purple work with the access points already installed in our centers?

Yes. Purple runs as a cloud overlay on Cisco Meraki, HPE Aruba, Ruckus, Juniper Mist, Ubiquiti UniFi, Cambium, Extreme and Fortinet access points. Centers on different brands report into one dashboard, and shoppers sign in the same way at each. New hardware is usually needed only where coverage is missing, most often at parking lot pay stations and elevator lobbies.

How is a shopping center WiFi platform from Purple priced?

Purple is sold on three plans: Connect, Capture and Engage. You choose the plan that matches the jobs you need. Connect covers connectivity, Capture adds data capture at sign-in, and Engage adds marketing to the consented shopper list for center events and promotions. Because Purple reuses your existing access points, your main cost is the license rather than new hardware. Purple quotes against your estate.

How hard is it to move from our current captive portal to Purple?

Moving is mainly configuration work, not installation, because Purple sits on the access points you already run. You point each center's shopper SSID at Purple for sign-in and set up tenant and staff networks. You can move one center at a time, starting with a pilot. Purple's support documentation covers the vendor-specific steps for each access point brand.

Is shopper sign-in data CCPA/CPRA compliant?

Yes. Purple is CCPA/CPRA compliant and ISO 27001 certified, and the sign-in form uses conscious-choice opt-ins. Marketing consent sits in a separate, unchecked box, so access never depends on it, as privacy regulations require. You decide which fields to collect. Keep to the minimum your reports and campaigns need, in line with the data minimization principle.

Can tenants taking card payments use center WiFi and stay PCI DSS compliant?

Yes, provided each tenant's network is segmented from shoppers and from other tenants. Each tenant gets its own private network and VLAN, so no shopper or neighbor can reach its devices. The PCI Security Standards Council treats segmentation as a way to reduce PCI DSS scope. Each tenant remains responsible for its own compliance, including its payment terminals and processes.

How accurate are WiFi footfall counts compared with door counters?

WiFi counts are accurate for trends, dwell time and repeat visits, while door counters are better for absolute entry numbers. Purple anchors repeat visits to the signed-in identity, so randomized device addresses do not create false new visitors. Shoppers who never connect do not appear in WiFi counts. Run both for a four-week pilot and use the ratio to scale WiFi figures across your portfolio.

Can we compare foot traffic and repeat visits across several centers?

Yes. Purple reports foot traffic, dwell time and new versus repeat visits by zone and by center in one dashboard, whatever access point brand each center runs. A shopper recognized at one center is recognized at the others. Your asset team can therefore see which centers share audiences and which centers are gaining or losing visits over time.

Key Definitions

Captive portal

The web page a device is redirected to before it is allowed online, used to present sign-in, terms of use and consent options. On a shopper network it sits in front of the shopper SSID and records the signed-in identity.

Your shopper sign-in runs here. Moving from a vendor splash page to Purple means pointing each center's shopper SSID at Purple's portal, which is configuration work rather than installation.

IEEE 802.1X

The IEEE standard for port-based network access control. It defines how a supplicant (the device), an authenticator (the access point) and an authentication server exchange EAP messages before the port opens to traffic.

Use it for the center management network. Security, cleaning and facilities staff authenticate individually, so access follows the directory instead of a shared password.

RADIUS

Remote Authentication Dial-In User Service, specified in IETF RFC 2865. It carries authentication and authorization requests between the access point and the server that checks credentials.

The RADIUS server validates each 802.1X login against Microsoft Entra ID, Okta or Google Workspace. It is the link that makes a disabled directory account remove network access.

VLAN (IEEE 802.1Q)

A virtual LAN, defined in IEEE 802.1Q, that tags frames so traffic stays logically separate while sharing the same physical cabling and switches.

Each tenant gets its own VLAN, so no shopper or neighboring tenant can reach its registers or inventory devices. That segmentation is what supports PCI DSS scope reduction.

iPSK (identity pre-shared key, also PPSK)

A method where one SSID carries many pre-shared keys. Each key identifies a group of devices and places them into a specific VLAN, rather than all devices sharing one passphrase.

It replaces one SSID per store, which adds beacon traffic and consumes airtime. In Purple's Identity-Based Networks each tenant gets its own key, so one departure means one revoked key.

Client isolation

An access point setting that blocks direct traffic between wireless clients on the same SSID, so devices can reach the internet but not each other.

Turn it on for the shopper network. It stops one shopper's phone from seeing another's, and keeps the public network away from tenant and staff devices.

MAC address randomization

Device behavior that replaces the fixed hardware (MAC) address with a random one. Android 10 and later use a randomized address per network by default; Apple has used a private address per network since iOS 14, with a rotating option added in iOS 18.

It makes the MAC address an unreliable identifier and lets passive counters count one phone several times. It is why Purple anchors repeat visits to the signed-in identity.

Passpoint (Hotspot 2.0) and OpenRoaming

Passpoint, also called Hotspot 2.0, builds on IEEE 802.11u network discovery so a device can find and join a network automatically using installed credentials. OpenRoaming extends that automatic, credential-based joining across participating networks.

Both let a returning shopper connect without relying on a MAC address, which further strengthens repeat-visit reporting across a portfolio.

Data minimization (CCPA/CPRA)

The privacy principle that personal data must be adequate, relevant and limited to what is necessary for the purposes for which it is processed.

It sets the ceiling on your sign-in form. Leave out date of birth, gender and cell phone number unless a specific campaign needs them, and agree the fields with your privacy officer.

Freely given consent (CCPA/CPRA and the TCPA and CAN-SPAM)

Privacy regulations require that consent is freely given, so a service cannot be made conditional on agreeing to processing it does not need. The TCPA and CAN-SPAM regulations apply the same consent standard to marketing communications.

Marketing consent must sit in a separate, unchecked box. Purple calls this a conscious-choice opt-in, and it keeps WiFi access independent of marketing.

PCI DSS network segmentation

Under the Payment Card Industry Data Security Standard, the PCI Security Standards Council treats isolating the cardholder data environment from other networks as a way to reduce the scope of assessment.

Tenants taking card payments over mall WiFi need their own segmented network. Each tenant stays responsible for its own compliance; your job is to ensure nobody else can reach its devices.

IEEE 802.11ax (WiFi 6)

The IEEE 802.11 amendment designed to improve efficiency in dense deployments, where many devices compete for the same airtime.

Favor it in food courts, where dwell is longest and density peaks at lunchtime, so you plan for capacity rather than coverage alone.

Worked Examples

A 120-unit regional center has two malls, a food court and an 1,800-space parking lot. Its vendor splash page asked for six fields, so few shoppers signed in, and leasing had only annual door-counter totals. How do you turn the WiFi into evidence for leasing?

The center cut the form to email, optional zip code and a separate marketing box, and recognized returning devices automatically. Outdoor access points went in at four pay stations and the elevator lobbies, and every access point was mapped to one of eight zones. After one quarter, the zone report showed food court dwell averaging 47 minutes, against 21 minutes in the upper mall. Leasing used that gap to market two vacant units beside the food court as leisure leases. Parking lot sign-ins fed into mall visit counts, so shoppers were no longer counted twice. These figures are illustrative, not a published Purple case study.

A city-owned town center has 40 independent tenants sharing one WiFi password, with center staff on the same network. Every tenant departure forces a password change and 39 tenants must reconnect every device. How do you fix this?

Each tenant received its own iPSK key mapped to its own VLAN, so one tenant SSID carries many keys without extra beacon traffic. Center staff moved to IEEE 802.1X authenticated against Microsoft Entra ID, and the shopper network was isolated from both. A tenant departure now means revoking one key instead of re-keying 39 tenants. Staff leavers lose access when their Entra ID account is disabled, with no separate network task. The segmentation also keeps card-taking tenants' devices out of reach of shoppers and neighbors. The figures are illustrative, used to show the method.

A center's events team needs to show the asset manager whether a six-week winter event in the atrium is worth repeating. What should the WiFi data show, and how?

The team set the atrium up as its own zone, so footfall there could be separated from the rest of the center. They compared the event period with the six weeks before it as a baseline, using the event period versus baseline report. They also invited shoppers on the consented list through the Engage plan. Atrium footfall rose 30% against the baseline, and the repeat-visit rate across the center rose by four points. The asset manager approved the event for the following year on the strength of those two numbers. The figures are illustrative, not a published Purple case study.

Frequently asked questions

Does Purple work with the access points already installed in our malls?

Yes. Purple runs as a cloud overlay on Cisco Meraki, HPE Aruba, Ruckus, Juniper Mist, Ubiquiti UniFi, Cambium, Extreme and Fortinet access points. Malls on different brands report into one dashboard, and shoppers sign in the same way at each. New hardware is usually needed only where coverage is missing, most often at parking lot pay stations and elevator lobbies.

How is a shopping mall WiFi platform from Purple priced?

Purple is sold on three plans: Connect, Capture and Engage. You choose the plan that matches the jobs you need. Connect covers connectivity, Capture adds data capture at sign-in, and Engage adds marketing to the consented shopper list for mall events and promotions. Because Purple reuses your existing access points, your main cost is the license rather than new hardware. Purple quotes against your estate.

How hard is it to move from our current captive portal to Purple?

Moving is mainly configuration work, not installation, because Purple sits on the access points you already run. You point each mall's shopper SSID at Purple for sign-in and set up tenant and staff networks. You can move one mall at a time, starting with a pilot. Purple's support documentation covers the vendor-specific steps for each access point brand.

Is shopper sign-in data CCPA/CPRA compliant?

Yes. Purple is CCPA/CPRA compliant and ISO 27001 certified, and the sign-in form uses conscious-choice opt-ins. Marketing consent sits in a separate, unchecked box, so access never depends on it, as the TCPA and CAN-SPAM require. You decide which fields to collect. Keep to the minimum your reports and campaigns need, in line with data minimization practices.

Can tenants taking card payments use mall WiFi and stay PCI DSS compliant?

Yes, provided each tenant's network is segmented from shoppers and from other tenants. Each tenant gets its own private network and VLAN, so no shopper or neighbor can reach its devices. The PCI Security Standards Council treats segmentation as a way to reduce PCI DSS scope. Each tenant remains responsible for its own compliance, including its payment terminals and processes.

How accurate are WiFi footfall counts compared with door counters?

WiFi counts are accurate for trends, dwell and repeat visits, while door counters are better for absolute entry numbers. Purple anchors repeat visits to the signed-in identity, so randomized device addresses do not create false new visitors. Shoppers who never connect do not appear in WiFi counts. Run both for a four-week pilot and use the ratio to scale WiFi figures across your portfolio.

Can we compare footfall and repeat visits across several malls?

Yes. Purple reports footfall, dwell and new versus repeat visits by zone and by mall in one dashboard, whatever access point brand each mall runs. A shopper recognized at one mall is recognized at the others. Your asset team can therefore see which malls share audiences and which malls are gaining or losing visits over time.

Got questions about your specific setup?

Our team works with venue operators, IT managers, and network engineers across 80,000 venues. Book a 20-minute call and we will show you how others like you solved it.