मुख्य मजकुराकडे जा
मराठी

Access Point आणि व्हेन्यू कव्हरेज अंदाजक

तुमच्या व्हेन्यूसाठी आवश्यक असलेल्या वायरलेस Access Points, स्विचेस आणि PoE बजेटची गणना करा.

1. Venue area size

Square Feet

2. Structural layout walls

Select the wall material that best represents your layout.

3. Expected user density

Estimate the maximum density of active client devices.

Approximately 1 device per 50 square feet.

4. Network traffic usage

Select the network activity profile for connected clients.

Recommended hardware deployment
3Access Points

Based on your area size (5000 sq ft) and coverage limit, we calculated a requirement of 3 APs for signal propagation. Accounting for high density capacity (100 concurrent devices at 5 Mbps each), we need 3 APs. The final design recommends 3 APs.

Estimated Devices100
Aggregated Bandwidth0.5 Gbps
PoE Power Budget56 W (PoE (802.3af))
Suggested Switch8-port PoE Switch

Manufacturer hardware guidelines

Cisco MerakiUse Meraki MR36/MR46 access points for low/medium density, and MR56 for high density. Pair with a Meraki MS120 or MS225 series PoE switch.
Ubiquiti UniFiDeploy UniFi U6 Pro or U6 Enterprise access points. Ensure the UniFi switch supports PoE+ (802.3at) to drive high-performance U6 APs.
Aruba NetworksUse Aruba AP-515 or AP-635 access points with CX 6100 switches. Set switch port power limits to class 4 to avoid smart power management limits.

Understanding signal attenuation and capacity limits

Wireless networks are constrained by both physical coverage and client capacity. In large open spaces, a single high-power access point can project a signal over a wide radius, but a high concentration of users (such as in auditoriums or restaurants) will saturate the AP’s radio channels before coverage is lost. This tool calculates both metrics and recommends the higher AP count to prevent network congestion.

अचूक नेटवर्क क्षमता नियोजन

वायरलेस कव्हरेजचे नियोजन करताना भौतिक अडथळे, युझर डेन्सिटी आणि ॲप्लिकेशन बँडविड्थच्या गरजा लक्षात घ्याव्या लागतात. हा कॅल्क्युलेटर हाय-परफॉर्मन्स गेस्ट किंवा एंटरप्राइझ नेटवर्कसाठी आवश्यक असलेल्या उपकरणांचा अंदाज लावण्यास मदत करतो.

मॉडेल केलेले मुख्य पॅरामीटर्स

  • ड्रायवॉल, वीट, काच आणि काँक्रीटच्या भिंतींमधून होणारे सिग्नल ॲटेन्युएशन.
  • स्टँडर्ड ऑफिस, हाय-डेन्सिटी हॉस्पिटॅलिटी आणि स्टेडियम वातावरणासाठी डिव्हाइस डेन्सिटी मर्यादा.
  • एकूण Power over Ethernet (PoE) पॉवर बजेट आणि स्विच पोर्ट आवश्यकता.

Deploying secure guest WiFi?

Calculating AP quantities is the first step. Purple helps you manage guest onboarding, marketing data capture, and location analytics seamlessly across all hardware.

Talk to a WiFi expert